3% openness
530 gsm
01 / 3% openness fabric
Sunscreen fabric that keeps the view out and the light in.
Dip-coated fibreglass fabric for exterior roller blinds and zip-screen systems. 17 colours, up to 3200 mm wide.
5% openness
520 gsm
02 / 5% openness fabric
A more open weave for brighter interiors.
Same dip-coated construction in four colours, for projects where daylight matters more than maximum glare control.
Manufacturer
SGS tested
03 / Our plant
Two dip-coating lines, ten Dornier looms.
PVC is compounded in house in Xintai, Tai'an, so formulation and colour consistency are controlled batch by batch.
3200 mm width
Available across all 17 colours of the 3% range, so most blind widths can be railroaded.
SGS tested
French M1 (NF P 92-503) and US NFPA 701 Method 2, reports available on request.
Start here
Choose by openness and construction.
Two openness factors, one dip-coated construction. Fire performance and fabrication notes sit alongside the product data.
Manufacturer in Shandong, China
PVC-coated fiberglass sunscreen fabric for exterior blinds.
We weave and dip-coat our own fabric in Xintai, Tai'an: two dip-coating lines, ten German Dornier looms, and PVC compounded in house so colour stays consistent batch to batch.
SGS tested to French M1 and US NFPA 701 Method 2. Reports available to specifiers on request.
Dip-coated
PVC penetrates each yarn
SGS tested
M1 and NFPA 701
Wide rolls
Up to 3200 mm
Our plant
3% openness fabric
530 gsm
530 g/m2, 0.80 mm, 165 tex yarn, 17 colours, widths from 1600 to 3200 mm.
Composition
Fiberglass 42% / PVC 58%
Openness
3% and 5%
Widths
1600 to 3200 mm
Our plant in Xintai, Tai'an, Shandong.
2 dip-coating lines / 10 Dornier looms
Why buyers specify this fabric
Specification first, then service.
Blind manufacturers and zip-screen system suppliers need reproducible fabric: the same weight, the same colour and the same fire performance batch after batch.
01 / Construction1
Dip-coated, not laminated
PVC is drawn into each fiberglass yarn during coating, so the coating follows the weave and cut edges stay clean under crush or ultrasonic cutting.
165 tex / 18 x 14 yarns per cm
02 / Fire performance2
French M1 and US NFPA 701
Both classifications are held on SGS reports for the fabric as supplied, with the report numbers available to specifiers.
AJFTS26004774R01_EN / AJFTS26004825R01_EN
03 / Widths3
3200 mm across all 17 colours
The widest roll is available in every colour of the 3% range, so most blind widths can be railroaded without a seam-direction change.
1600 to 3200 mm
Product range
3% and 5% openness
Two openness factors from the same dip-coated construction. Both are supplied with full specification tables and SGS fire reports.
Roll length is 50 m at 1600 mm, 40 m at 2850 mm and 33 m at 3200 mm.
View all products
PVC-Coated Fiberglass Sunscreen Fabric
PVC Coated Fiberglass Sunscreen Fabric 5% Openness 520gsm Solar Shading Fabric
PVC-coated fiberglass sunscreen fabric with 5% openness, 520 g/m2, 0.74 mm. 4 colours, widths from 1.6 m to 3.2 m. Tested to French M1 and US NFPA 701 Method 2 by SGS.
PVC-Coated Fiberglass Sunscreen Fabric
PVC Coated Fiberglass Sunscreen Fabric 3% Openness 530gsm for Zip Screen Blinds
PVC-coated fiberglass sunscreen fabric with 3% openness, 530 g/m2, 0.80 mm. 17 colours, widths from 1.6 m to 3.2 m. Tested to French M1 and US NFPA 701 Method 2 by SGS.
Fabric and care
What dip coating actually changes.
The coating process decides how a fabric behaves at a cut edge and how it holds up after seasons of rolling and unrolling.
Composition
Fiberglass 42% / PVC 58%, 165 tex yarn, 18 x 14 yarns per cm.
Fire performance
French M1 (NF P 92-503) and US NFPA 701 Method 2, tested by SGS.
Fabrication
Cut with crush or ultrasonic blades. Weld thermally, by HF, ultrasonic or sewing. Clean with lukewarm water and mild soap.
Fabric notes
Choosing openness, coating and fire ratings
Practical notes for buyers comparing sunscreen fabric: what the numbers mean on a building, and what to ask a supplier for.
View all notes
Featured noteFabric Knowledge
Reading Fire Ratings for Outdoor Blinds: M1 and NFPA 701
A specification sheet may list a European and a US fire standard at once. What each test measures, and what to ask a supplier for before a project is submitted for approval.
Latest notes
Fabric Knowledge
Dip-Coated vs Laminated Fibreglass Fabric: What Changes in Service
Two coating processes look similar on a sample card and behave differently on a building. What dip coating does to a fiberglass yarn, and how to check which one you are buying.
Buyer questions
Questions buyers ask before ordering
Widths, fire documentation, samples and REACH. If something is missing, ask and we will answer with the source document.
Still need help? Send the requirement and we will reply with the relevant test report or specification.
Contact
Send us the requirement
Tell us the application, the widths you need and the fire standard the project has to meet. We will reply with the specification and the relevant test reports.
Email
taylor@orendablinds.com
Phone
+86 185 5386 3016
Plant
Building 2, Jiangbei Optical Fiber Industrial Park
West of Hesheng Road, North of Yonghe Road
Xintai Development Zone, Tai'an, Shandong 271208, China
Timezone
China Standard Time (UTC+8)
Inquiry
Send the details
Share the application, widths and any fire standard the project requires.